
| Ürün Kodu | kcm82765800 |
|---|---|
| Model | RX480-E |
| KDV Oranı | 20 % |
| KDV Hariç Fiyat | 200.59 TL |
| Satıcı | ALKATRONİK |
| GND | Groud or negative pole |
| Working Temperature | -25~75 |
| +V | DC input |
| Quiescent Current | ?5mA |
| VT | Output |
| D0 | Data output |
| Working Frequency | 315MHz / 433MHz( Others can be customized ) |
| Receive Sensitivity | -108 dB |
| Receive Distance | 15 meters above |
| Frequency band | ± |
| Working mode | Point move, self-locking, interlocking |
| The output | 4 channel CMOS level signal Corresponding to the remote control ABCD 4 buttons |
| D1 | Data output |
| D2 | Data output |
| D3 | Data output |
| How To Programming | ? |
| 1. Delete existing data | Press learning button 8 times. Response: LED flashes 7 times |
| 2. Learning remote code | press learning key once, twice or three times (see below) |
| LED turns on | learning mode is active. Press any button of the remote control |
| LED indicator flashes three times | learning successfully completed |
|---|
| 3. Test | after the above operation , the receiver board can be controlled by the remote control |
|---|
| Press once | Inching mode (Momentary Mode) |
|---|
| Press twice | Self-Lock Mode (Toggle-Mode of the 4 Channels) |
|---|
| Press three times | interlocked mode (selected channel active and be cleared, if another channel becomes active) |
|---|